Clear interface statistics, Media statistics reports, Clear interface statistics -22 – Verilink 8100A (34-00237) Product Manual User Manual
Page 206: Media statistics reports -22
5-22
8 0 0 0 S e r i e s
Clear Interface Statistics
To clear interface statistics, type “Z” on the Interface Statistics menu. The
IAD displays the Clear Statistics menu:
Figure 5.6
Clear Interface Statistics Menu
To reset statistics for a specific interface, type the option.
The IAD immediately resets the statistics for the specified interface, and
displays the menu. Continue resetting statistics, or press Escape to return to
the Interface Statistics menu.
NOTICE:
You must enable bridging for the Clear Bridge Statistics option to
display. For more information on enabling bridging, refer to Bridge
Configuration Menu on page 4-55.
Media Statistics Reports
Media statistics reports display statistical information about the total packets
handled (Layer 2) on a per-port basis. Reports on physical connections vary,
based on the type of connection. To display specific media statistics, select an
interface to display the statistics as shown in the steps below:
1
Type “M” on the Reports menu to display Media statistics reports. The IAD
displays the interfaces on this IAD.
2
Type the number of the interface. With the interface chosen, the IAD
displays the Media Statistics menu.
spanning tree config packets
sent
No. of Spanning Tree Configuration packets sent
spanning tree topology
change packets sent
No. of Spanning Tree Topology Change packets sent
Parameter
Description
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual