Wan features, Network interfaces – Verilink 8100A (34-00237) Product Manual User Manual
Page 260

B-8
8 0 0 0 S e r i e s
PPP:
PPPoA, PPPoE, PAP, CHAP, IPCP (RFC
1332)
HDLC Support
Management:
SNMP via IP or EOC, MIB1, MIB2
(RFC 1213), Enterprise MIB, LES MIB
Configuration:
Console, Telnet (local, remote)
WAN Features
Transport:
ATM and Frame Relay
Voice Gateways:
CopperCom, Jetstream, General
Bandwidth, TdSoft, and any af-vmoa-
0145-compliant gateway
Softswitches:
MGCP v1.0, SIP 2.0
Protocols:
RFC 1483, RFC 1490, RFC 2364
Network Interfaces
T1
Network Interface:
RJ-48
Line Interface:
Balanced, 100
Ω
Line Rate:
1.544 Mbps
Clock Source:
Line/local (s/w selectable)
Line Coding:
B8ZS or AM1 per T1.401
Framing:
D4 (SF)/ESF, AT&T 54016 or ANSI
T1.403
Line Build Out:
0,
−7.5, −15, or −22.5 dB
Receive Sensitivity:
Automatic
Input Jitter Tolerance:
Per ATT TR62411
Protection:
Over voltage/over current
E1
Network Interface:
RJ-48
Line Rate:
2.048 Mbps (
±50 bps) unframed
Line Framing:
CAS or CCS, with or without CRC4
Line Code:
HDB3
Input Signal:
E1, +1 to
−27 dB
Connection:
RJ-48 jack at 120
Ω (±10 %)
Output Signal:
3.0 V (
±10 %) base-peak into 120 Ω
with protection
Transient Voltage:
1000 V protection, fused input / output
Jitter Control:
per G.823 Sections 2.1 and 3.0
Ones Density:
HDB3; complies with G.701 and G.703
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual