Verilink 8100A (34-00237) Product Manual - Manual (Page 32)

1-6 8 0 0 0 S e r i e s
• 8508/8504
− SHDSL (uses an RJ-11 connector).
Data Interfaces The data connection through the IAD supports IEEE 802.1-compliant bridging
and routing. When the IAD is configured for routing, it supports Routing
Information Protocol (RIP) version 1, version 2, or static IP routing. The IAD
complies with RFC-1812 when interfacing with IPV4 routers. The IAD can
terminate the following data interfaces:
• ATM data transport via SDSL, SHDSL, and T1/E1 per RFC 1483 or RFC
2364
• Frame Relay data transport via SDSL and T1/E1 per RFC 1490
• Frame Relay data transport per RFC 1483 with Q.922 frames
Interfaces and Features of the
High POTS Port Platform Architecture
High POTS Port Platform Architecture
The High POTS Port IADs are based on a single-board, fixed-configuration
architecture. Each unit supports 1 WAN interface (T1/E1, SDSL, SHDSL), 1
LAN interface, and 12, 16, or 24 POTS interfaces via an RJ-21 connector.
These units are housed in a metal enclosure with an internal power supply.
All units are based on a common core design consisting of a Motorola Power
QUICC CPU, 16 Mbytes of dynamic memory, and 4 Mbytes of FLASH
memory. Voice packetization and processing are handled by Texas
Instruments Digital Signal Processors (DSP).
High POTS Port Features
The Verilink High POTS Port IADs provide a highly interoperable,
cost-effective voice and high-speed data integration solution that is compatible
with industry-leading DSLAM and Voice Gateway manufacturers. These
IADs prioritize voice packets and dynamically allocate bandwidth between
voice and data services. Features include the following:
• For SDSL, supports the following DSLAMs:
• ATM: Lucent, Nortel, and Nokia
• Frame Relay: AccessLan, CopperMountain, and Paradyne.
•
For SHDSL, supports the following DSLAMS for ATM: Lucent, Nortel, and
Nokia
•
Supports the following Voice Gateways: CopperCom, JetStream, TdSoft,
Broadsoft, MetaSwitch, Cirpack, NuERA Tollbridge, Nortel, General
Bandwidth, Accelerated
• Provides seamless voice and high-speed data integration over SDSL, T1/E1,
or SHDSL
•
Supports data from POTS and 10/100Base-T customer premise interfaces