Verilink 8100A (34-00237) Product Manual - Manual (Page 226)

6-6 8 0 0 0 S e r i e s
set dhcp server
range
Sets the DHCP server low and high IP address range.
set dhcp server range
low-ip-address
IP address in decimal format (999.999.999.999).
high-ip-address
IP address in decimal format (999.999.999.999).
set dhcp server
subnet
Sets the DHCP server default subnet mask.
set dhcp server subnet
default-subnet-mask
Default subnet mask in decimal format (255.255.255.255).
set dns server
address
Sets the DNS primary server IP address.
set dns server address
ip-address
IP address in decimal format (999.999.999.999).
set dns server
address2
Sets the DNS secondary server IP address.
set dns server address
ip-address
IP address in decimal format (999.999.999.999)
set domain Sets the domain name of the network to which the IAD is connected.
set domain
set encoding Sets the type of line encoding used on the T1 network port.
set encoding (ami|b8zs) []
ami | b8zs
Line encoding allows ami or b8zs
set framing Sets type of framing for the T1 network.
set framing (esf|d4) []
esf | d4
Allows ESF or D4 framing
set hostname Sets the hostname of the IAD.
set hostname
set ip default
interface
Sets the IP router to send packets to the specified interface if no other route
applies.