Comtech EF Data SDM-300L3 - Manual (Page 287)

SDM-300L3 Satellite Modem Revision 1
Asynchronous Interface/AUPC MN/SDM300L3.IOM
11–11
11.4.1 Valid ASYNC Baud Rates
The ASYNC baud rates are limited by the terrestrial data rates. The following table
shows the relationships between data and baud rates.
If DR ≤ 15.999K Maximum baud rate is 150
If DR ≤ 31.999K Maximum baud rate is 300
If DR ≤ 63.999K Maximum baud rate is 600
If DR ≤ 127.999K Maximum baud rate is 1200
If DR ≤ 255.999K Maximum baud rate is 2400
If DR ≤ 511.999K Maximum baud rate is 4800
If DR ≤ 1023.999K Maximum baud rate is 9600
If DR ≤ 2047.999K Maximum baud rate is 19200
If DR ≤ 2048.999K Maximum baud rate is 38400
The following table lists examples.
If DR = 8.000K Baud rate can be 150 or lower
If DR = 16.000K Baud rate can be 300 or lower
If DR = 32.000K Baud rate can be 600 or lower
If DR = 64.000K Baud rate can be 1200 or lower
If DR = 128.000K Baud rate can be 2400 or lower
If DR = 256.000K Baud rate can be 4800 or lower
If DR = 512.000K Baud rate can be 9600 or lower
If DR = 1024.000K Baud rate can be 19200 or lower
If DR = 2048.000K Baud rate can be 38400 or lower
11.4.2 Front Panel Operation
For information on the additional front panel operations that are specific to the ASYNC
interface. The following menus are affected:
• Configuration Interface
• Configuration Local AUPC
• Utility Interface
• Remote AUPC Configuration
• Remote AUPC Monitor