Comtech EF Data SDM-300L3 - Manual (Page 110)

SDM-300L3 Satellite Modem Revision 1
Front Panel Operation MN/SDM300L3.IOM
4–42
FUNCTION SELECT: CONFIGURATION: INTERFACE:
ASYNC TX BAUD (CONDITIONAL)
ASYNC TX BAUD
110 bps
IMPORTANT
Conditional: The menu is only available when Modem Type = ASYNC
and requires that the Overhead Card is installed.
Programs the ASYNC overhead transmit baud rate for 110 to 19200 bit/s.
Upon entry, the current status of the ASYNC TX baud rate is displayed. Press [
↑ ] or [ ↓ ]
to select one of the following baud rates (bps): 110, 150, 300, 600, 1200, 2400, 4800,
9600, and 19200.
Press to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
ASYNC RX BAUD (CONDITIONAL)
ASYNC RX BAUD
110 bps
IMPORTANT
Conditional: The menu is only available when Modem Type = ASYNC
and requires that the Overhead Card is installed.
Programs the ASYNC overhead transmit baud rate for 110 to 19200 bit/s.
Upon entry, the current status of the ASYNC TX baud rate is displayed. Press [
↑ ] or [ ↓ ]
to select one of the following baud rates (bps): 110, 150, 300, 600, 1200, 2400, 4800,
9600, and 19200.
Press to execute the change.