Function select: monitor:eb/no, Function select: monitor: receive signal, Function select: monitor: sweep frequency – Comtech EF Data SDM-300L3 User Manual
Page 130: Eb/no 16.0 db, Receive signal -45.0dbm, Sweep frequency + 0 hz
SDM-300L3 Satellite Modem
Revision 1
Front Panel Operation
MN/SDM300L3.IOM
4–62
FUNCTION
SELECT:
MONITOR:EB/NO
EB/NO
16.0 dB
Displays the current E
b
/N
0
or “No Data” (if carrier is not locked).
Range: 2.0 to 16.0 dB.
Notes:
1. Low limit is based on the data rate.
2. High limit is 16.0 dB.
Press[
←
] or [
→
] to move the flashing cursor, and [
↑
] or [
↓
] to increment or decrement
the selected kbps. Press
FUNCTION SELECT: MONITOR: RECEIVE SIGNAL
RECEIVE SIGNAL
-45.0dBm
Displays the current receive signal level.
Range: -135 dBm + 10 log (SR) to -85 dBm + 10log (SR)
Press[
←
] or [
→
] to move the flashing cursor, and [
↑
] or [
↓
] to increment or decrement
the selected kbps. Press
FUNCTION
SELECT:
MONITOR: SWEEP FREQUENCY
SWEEP FREQUENCY
+
0 Hz
Displays the current offset frequency or “No Data” (if carrier is not locked).
Range: -500,000 to +500,000 Hz.
Press[
←
] or [
→
] to move the flashing cursor, and [
↑
] or [
↓
] to increment or decrement
the selected kbps. Press