Function select: utility: demodulator – Comtech EF Data SDM-300L3 User Manual
Page 160
SDM-300L3 Satellite Modem
Revision 1
Front Panel Operation
MN/SDM300L3.IOM
4–92
Notes:
1. For the RF ON Condition: the TX-IF shall be programmed On.
2. For RTS TX-IF, when enabled overrides CD.
This command allows for enabling or disabling of the TX carrier output depending on the
described conditions. One application for command is the operation of demand network
systems.
FUNCTION
SELECT:
UTILITY:
MODULATOR: TX SYMBOL RATE
TX SYMBOL RATE
64.000 Ksps
Status only: 4.800 to 2500 ksps. Provides symbol rate corresponding to the data rate, code
rate(s), modulation and overhead (framing) programmed into the modulator.
4.6.6.3
FUNCTION SELECT: UTILITY: DEMODULATOR
UTILITY
DEMODULATOR
Select information to view using the [
←
] [
→
] arrow keys, then press
- CDD-880 (124 pages)
- CDM-800 (130 pages)
- ODMR-840 (184 pages)
- CDM-750 (302 pages)
- CDM-840 (244 pages)
- SLM-5650A (420 pages)
- CTOG-250 (236 pages)
- CDM-700 (256 pages)
- CDM-760 (416 pages)
- CDM-710G (246 pages)
- CDM-600/600L (278 pages)
- CDMR-570L (512 pages)
- CDM-625 (684 pages)
- CDM-625A (756 pages)
- CDD-564A (240 pages)
- CDD-564L (254 pages)
- CLO-10 (134 pages)
- MCED-100 (96 pages)
- CDMR-570AL (618 pages)
- CDM-600 LDPC (2 pages)
- BUC Power Supply Ground Cable (2 pages)
- MPP70 Hardware Kit for CDM-570L (4 pages)
- MPP50 Hardware Kit for CDM-570L (4 pages)
- CDM-625 DC-AC Conversion (4 pages)
- CDM-625 DC-AC Conversion with IP Packet Processor (4 pages)
- DMDVR20 LBST Rev 1.1 (117 pages)
- DMD-2050 (342 pages)
- DMD2050E (212 pages)
- DMD1050 (188 pages)
- OM20 (220 pages)
- QAM256 (87 pages)
- DD240XR Rev Е (121 pages)
- MM200 ASI Field (5 pages)
- DM240-DVB (196 pages)
- MM200 (192 pages)
- CRS-150 (78 pages)
- CRS-280L (64 pages)
- CRS-170A (172 pages)
- CRS-180 (136 pages)
- SMS-301 (124 pages)
- CiM-25/8000 (186 pages)
- CiM-25 (26 pages)
- CRS-500 (218 pages)
- CRS-311 (196 pages)
- CIC-20 LVDS to HSSI (26 pages)