Comtech EF Data SDM-300L3 - Manual (Page 115)

SDM-300L3 Satellite Modem Revision 1
Front Panel Operation MN/SDM300L3.IOM
4–47
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
NOMINAL POWER (CONDITIONAL)
NOMINAL POWER
-10.0 dBm
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the nominal power value of the AUPC. The nominal power value can range
from 0 to -40 dBm, in 0.5 dBm steps.
Upon entry, the current nominal power value is displayed. Press [
↑ ] or [ ↓ ] to increment
or decrement the digit at the flashing cursor. Press to execute the change.
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
MINIMUM
POWER (CONDITIONAL)
MINIMUM POWER
-30.0 dBm
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the minimum power level of the AUPC. The minimum power level can range
from 0 to -40 dBm, in 0.5 dBm steps.