Configuration local aupc, Aupc enable off – Comtech EF Data SDM-300L3 User Manual
Page 114

SDM-300L3 Satellite Modem
Revision 1
Front Panel Operation
MN/SDM300L3.IOM
4–46
4.6.1.4
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC
(CONDITIONAL)
CONFIGURATION
LOCAL AUPC
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
The menu is available in several modes:
Self-Monitoring AUPC with 1
Modem:
In this mode ASYNC is not used. This does not require the
Overhead card or the Reed-Solomon cards.
Remote AUPC between 2
Modems:
The optional Overhead card is installed and the Modem Type
is ASYNC located under the Utility: Modem Type menu. In this
mode ASYNC is available or,
The optional Reed-Solomon cards are installed and the
Modem Type is AUPC located under Utility: Modem Type
menu.
Press
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
AUPC
ENABLE
(CONDITIONAL)
AUPC ENABLE
OFF
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the AUPC On or Off.
Upon entry, the current status is displayed. Press [
↑
] or [
↓
] to make the selection. Press