Function select: utility: system: remote address, Function select: utility: system: remote type, Function select: utility: system: operation mode – Comtech EF Data SDM-300L3 User Manual

Page 180

Text mode
Original mode

SDM-300L3 Satellite Modem

Revision 1

Front Panel Operation

MN/SDM300L3.IOM

4–112

FUNCTION

SELECT:

UTILITY: SYSTEM: REMOTE ADDRESS

REMOTE ADDRESS

The current modem address is displayed (1 to 255).

To change the remote address, press . Press [

↑

] or [

↓

] to make the selection.

Press [ENTER] to execute the change.

Note: Address 0 is reserved has a Global Address.

FUNCTION SELECT: UTILITY: SYSTEM: REMOTE TYPE

REMOTE TYPE

RS485

(2-WIRE)

Select EIA-485(2-Wire), EIA-485(4-Wire), or EIA-232.

FUNCTION

SELECT:

UTILITY: SYSTEM: OPERATION MODE

OPERATION MODE

DUPLEX

Programs the modem for DUPLEX, TX ONLY, or RX ONLY operation.

Note: When TX ONLY or RX ONLY is selected, the appropriate faults are masked from
the Faults and Stored Faults menus.