Comtech EF Data SDM-650B - Manual (Page 285)

SDM-650B Satellite Modem Asynchronous Overhead Channel Unit
Rev. 5 F–27
RX BAUD Programs the receiver baud rate.
On entry, the current receiver baud rate is displayed with the flashing
cursor on the first character. Use [
↑ ] and [ ↓ ] to select the desired rate.
The baud rate may be programmed from 110 to 38,400 bit/s. Press
[ENTER] to execute the change.
CH LENTH Programs the character length for the ASYNC format.
On entry, the current character length is displayed with the flashing
cursor on the first character. Use [
↑ ] and [ ↓ ] to select 5, 6, 7, or 8 bits.
Press [ENTER] to execute the change.
Stop BIT Programs the number of stop bits to 1 or 2.
On entry, the current status of the stop bits is displayed with the flashing
cursor on the first character. Use [
↑ ] and [ ↓ ] to select 1 or 2 stop bits.
Press [ENTER] to execute the change.
PARITY Programs the parity check to even, odd, or none.
On entry, the current status of the parity check is displayed with the
flashing cursor on the first character. Use the arrow keys to select Even,
Odd, or None. Press [ENTER] to execute the change.