Comtech EF Data SDM-650B - Manual (Page 203)

SDM-650B Satellite Modem Remote Control Operation
Rev. 6 B–27
B.1.4.13.3 Common Equipment Stored Faults
Command:
Response: >add/CSF_# hh:mm:ss MM/DD/YY”cr”
M&C_xxx”cr”
Monitor and Control Module (OK/FLT)
INT_xxx”cr” Data Interface Module (OK/FLT)
TXC_xxx”cr” Transmit Clock Loss (DS1 only)
BAT_xxx”cr” Battery (OK/FLT)
PS1_xxx”cr” +5V Power Supply (OK/FLT)
PS2_xxx”cr” +12V Power Supply (OK/FLT)
PS3_xxx”cr””lf”] -12V Power Supply (OK/FLT)
B.1.4.13.4 Interface Receive Side Status Stored Faults
Command:
Response: >add/IRSF_# hh:mm:ss MM/DD/YY”cr”
OVFL_xxx”cr”
Buffer Overflow (OK/FLT)
UNFL_xxx”cr””lf”] Buffer Underflow (OK/FLT)
Note: This command is only valid when Buffer Control is enabled. See the “BUFF_”
command definition.