Comtech EF Data SDM-650B - Manual (Page 187)

SDM-650B Satellite Modem Remote Control Operation
Rev. 6 B–11
B.1.3.11 Differential Encoder Enable
Command:
Response: >add/DENC_xxx”cr”lf”]
Status Only: Response:
>add/DENC_xxx”cr”lf”]
Where: xxx = ON or OFF.
B.1.3.12 Transmit Clock
Command:
Response: >add/TC_xxx”cr””lf”]
Status Only: Response:
>add/TC_xxx”cr””lf”]
Where: xxx = INT or EXT.
B.1.3.13 Receive Clock
Command:
Response: >add/RC_xxx”cr””lf”]
Status Only: Response:
>add/RC_xxx”cr””lf”]
Where: xxx = NRM or INV.
B.1.3.14 Baseband Loopback
Command:
Response: >add/BBL_xxx”cr””lf”]
Status Only: Response:
>add/BBL_xxx”cr””lf”]
Where: xxx = ON or OFF.