Comtech EF Data SDM-650B - Manual (Page 218)

Remote Control Operation SDM-650B Satellite Modem
B–42 Rev. 6
B.2.4.3 Descramble Enable
Command:
Response: >add/DE_xxx”cr””lf”]
Status Only: Response:
>add/DE_xxx”cr””lf”]
Where: xxx = ON or OFF.
B.2.4.4 RF Loopback
Command:
Response: >add/RFL_xxx”cr””lf”]
Status Only: Response:
>add/RFL_xxx”cr””lf”]
Where: xxx = ON or OFF.
B.2.4.5 IF Loopback
Command:
Response: >add/IFL_xxx”cr””lf”]
Status Only: Response:
>add/IFL_xxx”cr””lf”]
Where: xxx = ON or OFF.
B.2.4.6 BER Threshold
Command:
Response: >add/BERT_xxxx”cr””lf”]
Status Only: Response:
>add/BERT_xxxx”cr””lf”]
Where: xxxx = NONE or 1E-n (n = 3, 4, 5, 6, 7, or 8 exponent of threshold).