Comtech EF Data SDM-650B - Manual (Page 188)

Remote Control Operation SDM-650B Satellite Modem
B–12 Rev. 6
B.1.3.15 RF Loopback
Command:
Response: >add/RFL_xxx”cr””lf”]
Status Only: Response:
>add/RFL_xxx”cr””lf”]
Where: xxx = ON or OFF.
B.1.3.16 IF Loopback
Command:
Response: >add/IFL_xxx”cr””lf”]
Status Only: Response:
>add/IFL_xxx”cr””lf”]
Where: xxx = ON or OFF.
B.1.3.17 Time of Day
Command:
Response: >add/TIME_hh:mmxx”cr””lf”]
Status Only: Response:
>add/TIME_hh:mmxx”cr””lf”]
Where:
hh = hours.
mm = minutes.
xx = AM or PM.
Example: Set modem 67 time to 10:45 PM.
Command: <67/TIME_10:45PM”cr”
Response: >67/TIME_10:45PM”cr””lf”]