Avery Dennison Monarch 9864 Description of Commands - Manual (Page 88)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
88
Example Parameter: SYSTEM PARAMETERS > Temp. reduction = „20%“
RemoteID: 2026
%N Temp. reduction
%S Temp. reduction 20%
%i 20
#VTS Define standalone variable
Definition Defines a variable, which gets a value in standalone mode via the printer
operation panel or an external keyboard.
The command must be placed between #ER and #Q!
Syntax #VTS/name/wzy/l/vo/a/TEXT#G Group H (without AP 4.4)
name = Name of the variable (admissible characters see page 3).
w = W Counter field TEXT is incremented/decremented without a carry over, i.e.
only the first unit position of the figure is increased/decreased.
= C Counter field TEXT is incremented/decremented with a carry over
z = Z Leading zeros in counter fields are printed.
= S Suppresses leading zeros in counter fields. The remaining digits are printed
at the same position they were printed at with leading zeros.
y = U Update of the standalone input field. After each run of the printjob, the
latest counter value appears as default on the printer display.
= N
No update
of the standalone input field. After each run of the printjob, the
default counter value appears as default on the printer display.
l = int Maximum length of the input field on the operation panel in standalone
mode.
v = + Incrementation – offset is added to the text field.
= - Decrementation – offset is subtracted from the text field.
o = int Offset, which is added to (incremented) or subtracted from (decremented)
the TEXT depending on the prefix.
a = int Number of labels with the same constant number (1 to 255).
TEXT = Any alphanumerical text, whereby only numerical values are taken into
account during offset. All numerical values in the text string are taken into
account for the offset (e.g. 10A3B56 = 10356). Maximum number of
characters: 255.