Avery Dennison Monarch 9864 Description of Commands - Manual (Page 10)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
10
Immediate commands
#!A1 Interface activation
Definition Activates Easy Plug emulation (after the device has been switched on or
after it receives a passive command #!P1).
Following command #!A1, all incoming data is evaluated as Easy Plug
commands.
After the device has been switched on, the active command must be sent
once, otherwise the printer will not work.
Syntax #!A1 Groups A, B, D
#!An Groups E, G, H
#!A1 = Following this command the printer is in active mode, and commands which
are received are carried out wherever possible.
n = int Set printer ID number (0 to 31).
#!CA Easy Plug - erase everything
Definition
Resets Easy Plug emulation to a predefined initial status:
•
After a started label has been completed, an active printing process is
stopped and broken off.
•
The label format memory is erased.
•
Material settings remain unchanged (width, length, reel/gap, material
designation).
•
Easy Plug remains on receive stand-by.
•
Spooler (queue) is erased.
•
The error number for the #!Xn response string is deleted, if the error is
already acknowledged.
Syntax #!CA All groups
#!CA = Resets Easy Plug:
– Labels being printed are completed
– Series is broken off
– Spooler is erased
– Easy Plug waits for further formats