Avery Dennison Monarch 9864 Description of Commands - Manual (Page 16)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
16
#!SR Start printing
Definition
Starts the printing of a halted series.
The remaining labels of a format which has been halted by the stop
command #!SP are printed.
Syntax #!SR All groups
#!SR = A series halted by a stop command is restarted. The remaining labels of a
halted format are printed.
#!X Status acknowledgement V.24
Definition Request for a status acknowledgement via V.24.
Syntax #!X Group A
#!X = Status request:
– acknowledgement only possible only with a V.24 (TTY) interface (CTS
pin on TRUE)
– the acknowledgement is given with the same parameters as the receive
channel (same Baud rate, parity, number of stop bits, data bits)
– acknowledgement takes place without a handshake and inter-character
delay
Acknowledgement (1 byte) as follows:
7 6 5 4 3 2 1 0
0 = 0 Stacker OK
= 1 Stacker full
1 = 0 Material OK
= 1 Material end
2 = 0 Ribbon OK
= 1 Ribbon end
3 = 0 Head contact pressure OK
= 1 Head open
4 = 0 Quantity 0 (zero)
= 1 Quantity greater than 0 (zero)
5 = 0 Interface OK
= 1 Error during transfer
6 = 1 Always = 1
7 = 0 No other errors
= 1 Other errors