Avery Dennison Monarch 9864 Description of Commands - Manual (Page 108)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
108
Example 4 #!A1
#IMN100/100/
#ERN
#T10#J10
#YN902/0U/400///\u50D1#G
#Q1#G Prints the chinese character pictured
below.
Fig. 7 Printout belonging to example 4.
#YR Rectangle definition
Definition This command is used to define rectangles of varying sizes and line
thicknesses.
Command must stand between #ER and #Q!
Syntax #YRa/d/h/l/b Groups A, B
#YRa/dr/h/l/b Groups D, E, G, H
a = int Line type number.
Print a copy of the info-printout "Font status" (group H) or "STA2" (other
groups) respectively, to get a sample of the available line types and
numbers. For detailed information on info-printouts refer to topic section
"Info-printouts and parameters".
opt. d = 0 Rectangle in normal write direction
= 1 Rectangle rotated by 90 degrees
= 2 Rectangle rotated by 180 degrees
= 3 Rectangle rotated by 270 degrees
The rectangle rotates around the reference point.
r = R The rectangle is recreated for each label (e.g. as the background of a
number field).
If rectangles are required as a background, they must be defined before the
foreground.
h = num Line thickness in mm
l = num Width of the rectangle in mm