Avery Dennison Monarch 9864 Description of Commands - Manual (Page 104)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
104
#YN Text field
Definition
Printing text with scalable fonts.
Non-scalable fonts (fixfonts) are also available and can be printed with the
command #YT .
The command #YN defines the size and font of a text, as well as the
direction of rotation and consecutive numbering.
The following must be taken into consideration when using consecutive
numbers:
– A sufficient number of positions must be defined corresponding to the
biggest number to be used. Leading zeros are printed.
– Only numerical characters are incremented or decremented.
– All numerical characters within a text string are incremented or
decremented.
Command must stand between #ER and #Q!
Syntax #YNz/dbjf/e/vo/a/TEXT#G Groups D, E, G
#YNz/dbqmjwcghrkp/e/vo/a/TEXT#G Group H
z = int Font number
The fonts 100 and 101 are internal scalable fonts and are therefore always
available.
See printer manual, topic section "Internal Fonts".
Non-internal fonts can be loaded from Compact Flash card.
For detailed information refer to the manual "Plug-in cards", topic section
"Application", paragraph "CompactFlash card".
opt. d = 0 Normal write direction
= 1 Text rotated by 90 degrees
= 2 Text rotated by 180 degrees
= 3 Text rotated by 270 degrees
opt. b = A Text printed inversely:
A dark background must first be applied to the print area (line or rectangle).
Inverse printed offset is not possible within Groups A and B.
opt. q = E Existing Bitimage is inverted.
Example
(Inverted Bitimage)
#!A1
#ER
#T5#J5#YL0/0/2.5/90#G
#T5#J5#YN100/0E////Example#G
#Q1/ The part of the text which overlaps
the line is printed in white, the rest
in black.
opt. m = X Text field consists of one variable data field