Avery Dennison Monarch 9864 Description of Commands - Manual (Page 13)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
13
Special
ID
Function
-8 Additional output of parameter type and setting range as
comments (example 3).
More information about parameter types can be found further
below.
-16 Additional output of service data as comments (example 4).
-30 Combination of the values -16, -8, -4, -2 by addition: (-16)+
(-8)+(-4)+(-2)=(-30). This activates all above mentioned types
of comments (example 5).
Tab. 1 Parameter-IDs for special functions.
Example 1
Printer specific
commands
„commented out“
#!PG-1#G
#!A1
#PC1001/1
#PC1002/8
#PC1003/4.00
#PC1004/4.00
*PC1024/30
(Å preceding “*”)
…
Example 2
Additional comments
#!PG-4#G
#!A1
#G Machine Setup for AP 5.4 300 Dpi Version: R2.32P
PE2.32C
#G Serial number : 12345657890
#G MAC Address : 00.0a.44.02.09.89
#G Creation date : 16.06.2004 09:23
#G--------------------------------------------------------------------------
#G Printer Parameter Menu
#G--------------------------------------------------------------------------
#PC1001/1
#G Infeed no. : Nr. 1
#PC1002/8 #G Inf. change spd. : 8 Inch/s
#PC1003/4.00 #G Print speed : 4 Inch/s
#PC1004/4.00 #G Feed speed : 4 Inch/s
#PC1005/1 #G Materialtype : Punched
#PC1006/35.00 #G Materiallength : 35.0 mm
#PC1007/104.00 #G Materialwidth : 104.0 mm
#PC1008/0.00 #G Punch offset : 0.0 mm
…