X: x labels per row – Avery Dennison Monarch 9864 Description of Commands User Manual

Page 39

10/07 Rev. AA

MANUAL EASY PLUG

Commands

All

devices

A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4

x: x labels per row

Fig. 1 Illustration of the parameters b and n at 3-track label material (three labels are

printed at the same time side by side).

opt.

b = num

Width of a label

Parameter b has only to be set for the use of multitrack label materials

(n > 1).

The number of tracks n multiplied by the label width b must not be larger

than the material width, otherwise the overhanging track will not be printed.

opt.

d = num

Width of the double cut (x.xx mm)
Maximum possible double cut = 5.00 mm

If the double cut command is processed without specifying d, the value of

the last processed print job or the value set by parameter menu will be
used.

Fig. 2 Example of a setting with n = 3 and r = 1.

Z0161E

.cdr

Testlabel

Label
width b

Label row with
n = 3 labels

Material
width

Feed direction

Z0162E

.cdr

Testlabel

Feed direction

✂

Cut

n = 3

r = 1