Avery Dennison Monarch 9864 Description of Commands - Manual (Page 17)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
17
#!XB Status ackn. with bar code
Status acknowledgement with bar code
Definition After a label has been printed, #!XB delivers the printer status and the bar
code on the label. Delivery normally occurs in 14 Bytes.
Exception: Delivery of 26 Bytes, if:
a) short material (ABO or MFK) is being used, and
b) material end is reached
in this case, the bar code of the last label and the label before are
delivered.
Syntax #!XB Group H (only TT4)
Bit Nr.: 7 6 5 4 3 2 1 0
Byte 0: Printer type: 2 = TT4
No. of last supply unit to transport
material to the front.
Byte 1: Last printer error message:
0000 0101 bin = 5 dez Material end
0000 0111 bin = 7 dez Ribbon end
0110 0011 bin = 99 dez other errors
Bytes 2 bis 13: 12-figure bar code of the last printed label
Special case: Delivery of 26 Bytes:
Bit Nr.: 7 6 5 4 3 2 1 0
Byte 0: see above
Byte 1: see above
Bytes 2 to 13: 12-figure bar code of the last regular printed label – that is one before the
very last label of the roll.
Bytes 14 to 25: 12-figure bar code of the last label – which is crosshatched.