Avery Dennison Monarch 9864 Description of Commands - Manual (Page 75)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
75
#RM Measurement
Definition This command initiates a test of a certain type and stores results in a
defined destination.This command overides any other RFID command. Do
not use any other RFID command within the same format.
Command must be placed between #ER and #Q!
Syntax #RMt/d Group H
opt. t = int type of test
0 = Measure tag read detects per interval to identify optimized antenna
position (default)
opt. d = int destination
0 = print histogram on label (default)
1 = save as file to Compact flash card
(not implemented yet)
2 = send to EASYPLUG interface (not implemented yet)
Example
#!A1
#IMSR99.0/152.0//6N/0/1 Activate
Material definition
- use exact label size
- for EPC tags use option N (No detect)
- use antenna offset 0 to start at beginning
of label
#ERN//
#RM0,0 Start label
Measure number of read detects per
interval and print result as bar on label
#Q1#G Quantity 1
#RX Select gap sensor
Definition
Switching to the required photoelectric switch by means of a command.
Command must stand outside of #ER and #Q!
Syntax #RXn Groups E, G, H
n = 0 Transparency
= 1 Reflex
= 2 Full-size