Avery Dennison Monarch 9864 Description of Commands - Manual (Page 52)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
52
J
#J Vertical print position
Definition Determines the vertical print position with absolute value in mm.
Zero position is always the bottom, left-hand corner of the label. Exception:
command
#R is active.
Command must stand between #ER and #Q!
Syntax #Jx All Groups
x = num Vertical print position in mm in relation to the bottom left-hand corner of the
label (000.00 mm)
Text outside of the defined label area is not printed.
Reference line of the text is the base line. A base line, which exceeds the
defined label area, causes an error message, even if there are no
descenders in the text.
Fig. 5 Base line of a text. Even if the text has no descenders (as the y and the g in the
example text), the base line lies a certain distance below the text.
Example #J5 Text begins 5 mm from the bottom.
#J20 Text begins 20 mm from the bottom.
Tx
Feed
Zero point
DEMO TEXT
DEMO TEXT
Jx
Easy-Plug