Avery Dennison Monarch 9864 Description of Commands - Manual (Page 69)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
69
#RC2/
#J14#T10#M1/1#YT106/0///GERMANY
#J26#T10#M1/1#YT106/0///GERMANY
#J32#T10#M1/1#YT106/0///GERMANY
#J44#T10#M1/1#YT106/0///GERMANY
#J15#T30#YL0/0/5/10
#RC3/
#J20#T10#M1/1#YT106/0///GERMANY
#J26#T10#M1/1#YT106/0///GERMANY
#J38#T10#M1/1#YT106/0///GERMANY
#J44#T10#M1/1#YT106/0///GERMANY
#J28#T30#YL0/0/5/10
#Q1/
#RSS RSS & CC
Reduced Space Symbology (RSS) & Composite Component (CC)
Definition Printing of a bar code field with a composite symbology bar code.
The command must be terminated with #G!
Syntax #RSSz/dw/s/vo/a/TEXT#G Group H
z = int Bar code number
See topic section „Info-printouts & Parameters“, paragraph „Font status“,
Bar code library“.
d = 0 Normal writing direction
= 1 Printout rotated by 90°
= 2 Printout rotated by 180°
= 3 Printout rotated by 270°
opt. w = W Counter field TEXT is incremented/decremented without a carry over, i.e.
only the first unit position of the figure is increased/decreased.
s = int Number of printer dots for the bar code module width.
opt. v = + Incrementation – the offset is added to TEXT.
= - Decrementation – the offset is subtracted from TEXT.
opt. o = int Offset, which is added to (incremented) or subtracted from (decremented)
the TEXT depending on the prefix.
opt. a = int Number of labels with the same constant number (1 to 255).
TEXT Primary data and optional secondary data (separated by a „|“);
alphanumerical code according to the selected bar code type, up to a
maximum of 1024 characters long.