Avery Dennison Monarch 9864 Description of Commands - Manual (Page 68)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
68
#RC Coloured ribbon transport
Definition On printers with colour option (multi-coloured printing), the appropriate
colour field is transported on the ribbon under the print head using the
command #RC. A maximum of 4 colour fields are possible. The layout can
differ. One of the fields (0) assumes the task of co-ordinating colour and
impression.
Command must stand between #ER and #Q!
Note
The command #RC defines the colour in which the following elements are
to be printed. This colour remains active until a new command #RC
activates another colour or until a new label format is defined with #ER.
Syntax
#RCn/ Group E
n = int Colour of the selected field.
4-coloured ribbon No. of colours a = 4 (see #CP)
n = 0 black
= 1 yellow
= 2 magenta
= 3 cyan
Other coloured No. of colours a is not equal to 4 (see #CP)
ribbon
n = 0 1st colour after the double bar
= 1 2nd colour after the double bar
= 2 3rd colour after the double bar
etc.
Example
This example prints the word GERMANY and colour fields in 8 colours
(4-coloured ribbon).
#!A1
#IMS48/58
#ERN
#RC0/
#J2#T10#M1/1#YT106/0///GERMANY
#J2#T30#YL0/0/5/15
#RC1/
#J8#T10#M1/1#YT106/0///GERMANY
#J26#T10#M1/1#YT106/0///GERMANY
#J32#T10#M1/1#YT106/0///GERMANY
#J38#T10#M1/1#YT106/0///GERMANY
#J20#T30#YL0/0/5/10