Avery Dennison Monarch 9864 Description of Commands - Manual (Page 103)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
103
#YL Line definition
Definition
This command is used to define lines of varying lengths and thicknesses.
Command must stand between #ER and #Q!
If lines are required as a background, they must be defined before the
foreground.
Syntax #YLa/d/h/l Groups A, B
#YLa/dr/h/l Groups D, E, G, H
a = int Line type number.
Print a copy of the info-printout "Font status" (group H) or "STA2" (other
groups) respectively, to get a sample of the available line types and
numbers. For detailed information on info-printouts refer to topic section
"Info-printouts and parameters".
opt. d = 0 Line in normal write direction
= 1 Line rotated by 90 degrees
= 2 Line rotated by 180 degrees
= 3 Line rotated by 270 degrees
opt. r = R The line is recreated for each label (e.g. as the background of a number
field).
Don´t use parameter r together with inverse fields! – otherwise the field
contents will be overprinted by the line.
h = num Line thickness in mm
l = num Line length in mm
Example #YL1/0/3/20 Line type 1, 0 degree rotation, 3 mm thick, 20 mm long
#YL4/3/1/50 Line type 4, 270 degree rotation, 1 mm thick, 50 mm long
l
Feed
Zero point
h
d = 1
d = 0