Avery Dennison Monarch 9864 Description of Commands - Manual (Page 38)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
38
E
#ER End of run information
Definition Start of a label format (print job) and definition of general information.
Print jobs must be started with the command #ER and closed with #Q!
Syntax #ERxr/n/b Group A
#ERx/n/b Groups B, TTX 300 online/ Cobra online
#ERxr/n/b/d TTX 207 / Da Capo
#ERxyr/n/d Group G
#ERxyr/n/b/d Group E without TDI
#ERuxyr/n/b/d TDI
#ERxrsf/n/b/d Group H
opt. u = H Sets the parameter SYSP > LPOS to the value HEAD.
= D Sets the parameter SYSP > LPOS to the value DEPO.
x = N No change label
= Y Change label after series (a change label is somewhat longer than the
preceding labels - this can be useful, for example when using a stacker.
The longer change label then protrudes out of the label stack and makes it
easier to sort the labels).
opt. y = I Label is printed inversely
= (blank) Normal print
Caution limitation: During inverse printing, misprints of update fields
(number field, clock, line repeat, Easyline).
opt. r = int No. of printed labels before cut
0: No cut in the entire series.
: same as 0.
1: Each label / label row is cut.
2: Cut after every second label / label row.
x: Cut after every xth label / label row.
opt. s = D (not with AP 4.4/5.4/7.t) Performs a dot check after the printjob has been
finished.
For detailed information on the dot check, see topic section "Info-printouts
and parameters", parameter SERVICE FUNCTION > Head dot test .
opt. f = C Ribbon autoeconomy switched off
F Ribbon autoeconomy switched on
T Thermodirect printing
opt. n = int Number of labels in a label row. A label row is a line of labels rectangular to
the feed direction. All labels in a row are printed at the same time.
0: One label per row
: One label per row
1: One label per row
2: Two labels per row