Cg adjust intercharacter gap, Adjust intercharacter gap – Avery Dennison Monarch 9864 Description of Commands User Manual
Page 30
10/07 Rev. AA
MANUAL EASY PLUG
Commands
All
devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
30
#CG
Adjust intercharacter gap
Definition
Adjust the intercharacter gap.
Group E only:
This command can be used to alter the space between printed characters
for fixed height fonts (command
). The space between characters can
be reduced or expanded. The gap for scalable fonts (command
cannot be changed.
Only implemented in the US version of the firmware!
(from version 1U42 R11 on).
Both
groups:
The default size of the character gap depends on the used font size.
Syntax
#CGvn
Group E, H
v = +
Enlarge the intercharacter gap compared with the default value.
= -
Reduce the intercharacter gap compared with the default value.
n = int
Number of dots to adjust gap (-8 to +8).
= 0
Sets the gap back to the default value.
Example
Data stream
Sample Output
#!A1#IMS82/180#ERN
#J175.0#T035#YT106/0///YT103
#J170.0#CG-8#T035#YT103/0///-8 HHHHHHHHHH#CG0
#J165.0#CG-7#T035#YT103/0///-7 HHHHHHHHHH#CG0
#J160.0#CG-6#T035#YT103/0///-6 HHHHHHHHHH#CG0
#J155.0#CG-5#T035#YT103/0///-5 HHHHHHHHHH#CG0
#J150.0#CG-4#T035#YT103/0///-4 HHHHHHHHHH#CG0
#J145.0#CG-3#T035#YT103/0///-3 HHHHHHHHHH#CG0
#J140.0#CG-2#T035#YT103/0///-2 HHHHHHHHHH#CG0
#J135.0#CG-1#T035#YT103/0///-1 HHHHHHHHHH#CG0
#J130.0#CGO#T035#YT103/0///0 HHHHHHHHHH#CG0
#J125.0#CG+1#T032#YT103/0///+1 HHHHHHHHHH#CG0
#J120.0#CG+2#T032#YT103/0///+2 HHHHHHHHHH#CG0
#J115.0#CG+3#T032#YT103/0///+3 HHHHHHHHHH#CG0
#J110.0#CG+4#T032#YT103/0///+4 HHHHHHHHHH#CG0
#J105.0#CG+5#T032#YT103/0///+5 HHHHHHHHHH#CG0
#J100.0#CG+6#T032#YT103/0///+6 HHHHHHHHHH#CG0
#J095.0#CG+7#T032#YT103/0///+7 HHHHHHHHHH#CG0
#J090.0#CG+8#T032#YT103/0///+8 HHHHHHHHHH#CG0
#Q1/