Avery Dennison Monarch 9864 Description of Commands - Manual (Page 19)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
19
– The status number is maintained in the acknowledgement string until the
status changes or a reset or the command #!CF is performed.
Syntax
#!Xn Groups B, D, E, G, H
n = int Acknowledgement delay period
= 0...9 0 = 0 ms, 1 = 100 ms, 2 = 200 ms etc. up to 9 = 900 ms
Acknowledgement string
(groups B to G) S aaAbcdMqqqqqFeeeeeKxx
The acknowledgement string is always 22 characters long (in ASCII,
decimal digits, without spaces).
a = Last status number (as shown in operating panel display), 00 = no error
b = 0 If status has already been requested with #!Xn
= 1 If status is being requested for the first time
c = 0 If status has already been acknowledged at the operating panel
= 1 If status is displayed, but has not yet been acknowledged
d = 0 If there is no label format stored
= 1 If a format has been opened, but not closed with #Q
= 2 If a valid format is being printed
q = Number of labels still to be printed
e = Number of bytes still available in the spooler buffer
x = EPROM version number (e.g. 10 = Version 1.0)
Example #!X0 Status request with 0 ms delay period.
Example acknowledgement:
S00A000M00054F12000K10
Acknowledgement string
(Gruppe H)
S
aaaaAbcdMqqqqqqFeeeeeeKxxxxxxxxxxxxxxxx
The acknowledgement string for group H printers is always 40 characters
long (in ASCII, decimal digits, without spaces).
a = Last status number (as shown in operating panel display), 0000 = no error
b = 0 If status has already been requested with #!Xn
= 1 If status is being requested for the first time
c = 0 If status has already been acknowledged at the operating panel
= 1 If status is displayed, but has not yet been acknowledged
d = 0 If there is no label format stored
= 1 If a format has been opened, but not closed with #Q
= 2 If a valid format is being printed
q = Number of labels still to be printed
e = Number of bytes still available in the spooler buffer
x = Firmware version no. – same text string appears on the lower display line
shortly after switching on the printer.