Avery Dennison Monarch 9864 Description of Commands - Manual (Page 55)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
55
#MXC Bar code MaxiCode
Definition
Prints the 2-dimensional "MaxiCode" bar code.
(Only groups E, G)
The appropriate bar code card is required for the MaxiCode.
Refer to the Plugin Card Manual, topic section "Card Types"
The Easy Plug command #YB for bar codes is replaced by the special
command #MXC for the Maxicode.
Syntax #MXCz/d/x/y/vo/a/TEXT#G Groups E, G
#MXCz/dw/x/y/vo/a/TEXT#G Group H
z = int MaxiCode modes 2, 3, 4 and 6
d = 0 Normal write direction
= 1 Text rotated by 90 degrees
= 2 Text rotated by 180 degrees
= 3 Text rotated by 270 degrees
opt. w = W Counter field TEXT is incremented/decremented without a carry over, i.e.
only the first unit position of the figure is increased/decreased.
x = int Symbol number for code-splitting (1 to 8)
y = int Number of symbols for code-splitting (1 to 8)
opt. v = + Incrementation – offset is added to the text field.
= - Decrementation – offset is subtracted from the text field.
opt. o = int Offset, which is added to (incremented) or subtracted from (decremented)
TEXT depending on the prefix.
opt. a = int Number of labels with the same constant number (1 to 255).
TEXT = Depending on the mode (z), the following information:
z TEXT (Syntax) Char. Data
2 ppppppppp ccc sss MSG
9
3
3
84
Numerical postcode
ISO national code
Service class
User data
3 pppppp ccc sss MSG
6
3
3
84
Alphanumerical postcode
ISO national code
Service class
User data
4 MSG
93
Any alphanumerical code