Avery Dennison Monarch 9864 Description of Commands - Manual (Page 47)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
47
I
#IDM Data Matrix Code
Definition Prints the 2-dimensional "Data Matrix" bar code.
To print the Data Matrix Code, the standard bar code command #YB has to
be replaced by the special command #IDM.
Use of the ECC 200 Level (Error checking and correction algorithm),
without any possibility to change the level.
Groups E, G:
The appropriate bar code card (Part number A0118) is required for the
Data Matrix Code.
Refer to the Plugin Card Manual, topic section "Card Types"
Syntax #IDM/d/s/vo/a/TEXT#G Groups E, G
#IDM/dgwrc/s/vo/a/TEXT#G Group H
#IDM = Control character for the Data Matrix Code
d = 0 Normal write direction
= 1 Text rotated by 90 degrees
= 2 Text rotated by 180 degrees
= 3 Text rotated by 270 degrees
opt. g = D Text field consists of one variable data field.
opt. w = W Counter field TEXT is incremented/decremented without a carry over, i.e.
only the first unit position of the figure is increased/decreased.
opt. r = Rn n = Number of rows
opt. c = Sn n = Number of columns
As a standard, the size (number of rows and columns) is calculated
automatically in dependance of the input data (smallest possible matrix).
Use the parameters r and c to set the size.
Row Column Row Column
10 10 64 64
12 12 72 72
14 14 80 80
16 16 88 88
18 18 96 96
20 20 104 104
22 22 120 120
24 24 132 132
26 26 144 144
32 32 8 18