Avery Dennison Monarch 9864 Description of Commands - Manual (Page 18)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
18
#!XC Pharmacy Code ackn.
Pharmacy Code acknowledgement
Definition #!XC delivers the data of the last printed pharmacy bar code.
Delivery occurs in the form:
xxxxxxxyyyyyyyy (Code content without checksum), with:
xxxxxxx = 7-digit CNK number
yyyyyyyy = 8-digit sequential number
If no pharmacy bar code was printed since the last printer reset, the
delivery is 000000000000000.
Syntax #!XC Groups E, H
#!Xn Bar code acknowledgement
Definition
#!Xn delivers bar code.
Syntax
#!Xn Group H (only TT4)
#!Xn = Request for bar code
n = 0 Delivers all bar codes:
Four 12-figure bar codes = 48 bytes
n = 1 delivers the bar code of the 1st supply unit (12 bytes)
n = 2 delivers the bar code of the 2nd supply unit (12 bytes)
n = 3 delivers the bar code of the 3rd supply unit (12 bytes)
n = 4 delivers the bar code of the 4th supply unit (12 bytes)
#!Xn Status acknowledgement
Definition Groups B to G:
Request for a status acknowledgement via RS232 or RS485/422.
Group H:
Request for a status acknowledgement using the selected interface. For
transmission via Centronics, nibble mode is used.
All groups:
Notes concerning status acknowledgement via serial interface:
– Acknowledgement at RS232 will only work, if the CTS pin is set to
TRUE.
– The acknowledgement is given with the same parameters as the receive
channel (same Baud rate, parity, number of stop bits, data bits).
– Acknowledgement takes place without a handshake and inter-character
delay
– A delay period can be set.