Avery Dennison Monarch 9864 Description of Commands - Manual (Page 79)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
79
s = int Number of printer dots for one Data Matrix block (1 to 60).
Example #SDM/0R12S12/16/0/1/00000A89#G The data will be coded in a
12x12 matrix.
#SF Fixfont definition
Defines the font for a not scalable text field (fixfont). Printing of the bar code
requires a subsequent #VW-command.
Command must be placed between #ER and #Q!
Syntax #SFz/k/b#G Group H (without AP 4.4)
z = int Font number (100 to 116)
Refer to the Info-Printout PRINT INFO > Font status or refer to the user manual,
topic section "Internal Fonts" for a listing of all internal fonts.
In case of an invalid font number, the text is printed with font 100.
. k = Snum Fixed distance in mm between all characters in TEXT. Input in millimeters.
The distance is measured from character beginning to character beginning.
The character S has to be succeeded without blank by the value “num”.
b = int Micro spacing measured in printhead dots. The value is added to the
standard character distance and allows fine adjustment of the text width.
Value range [0…16].
#SFN Code 49 definition
Definition of a “Code 49” bar code. Printing of the bar code requires a
subsequent #VW-command.
Command must be placed between #ER and #Q!
Syntax
#SFNm/kx/s/h#G Group H (without AP 4.4)
m = 0 Alphanumeric Mode
= 1 Append Mode
= 2 Numeric Mode
= 3 Group Alphanumeric Mode
= 4 Alphanumeric Mode, Shift 1
= 5 Alphanumeric Mode, Shift 2
= 6 Reserved
= 7 Automatic Mode (default setting). The printer determines starting mode and
encodation method by analyzing TEXT. This is the recommend mode.
k = M Bar code with plain copy line
The plain copy line can extendet beyond the right edge of the code!
= O Bar code without plain copy line (default setting)
opt. x = J Plain copy line below the bar code
= A Plain copy line above the bar code