Avery Dennison Monarch 9864 Description of Commands - Manual (Page 72)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
72
#RFH Request data - send to host
Definition
This command requests data of a RFID variable that has been read and
assigned with #RFR command. That data is transmitted as response over
selected EASYPLUG interface (same interface that is used for this
request).
Command must be placed between #ER and #Q!
Syntax
#RFHi/m/n/HEAD Group H
i = int number of variable that has been created by read data command #RFR
m = int number of bytes in response, filled if necessary with white space (0x20)
n = int Number of bytes in HEAD
HEAD characters that precede response
Example Data on transponder (block size 4
assumed e.g. I-Code) shown in hex
notation:
MSB ... LSB
block address 3: 41 42 43 44
block address 4: 30 31 32 33
#RFR1/0/I/L/2/3
#RFH1/14/6/BLOCK: 2 blocks from transponder starting at
block 3 will be read and put into
variable with id number 1.
Text in variable 1: DCBA3210
Request var 1
Response: BLOCK:DCBA3210
#RFR3/2/B
#RFH3/20/4/EPC= EPC in variable 3
Request var 3
Response: EPC=A5A5800F35609854
#RFR3/1/B
#RFH3/20/4/UID= UID in variable 3
Request var 3
Response: UID=E005000000000C5B