Avery Dennison Monarch 9864 Description of Commands - Manual (Page 112)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
112
#YT Text field definition
Definition
This command is used for (optional) parameter settings and entering text.
Command must stand between #ER and #Q!
Syntax #YTz/dbj/vc/a/TEXT Group A
#YTz/dbjf/vo/a/TEXT TTX 207/Da Capo
#YTz/dtbj/vo/a/TEXT Group B
#YTz/dbfgj/vo/a/TEXT Groups E, G, TTX 300/Cobra Online
#YTz/dbqgnwjk/vo/a/TEXT Group H
z = int Font number (YT100 to YT116)
Refer to the Info-Printout PRINT INFO > Font status for group H or INFO > STA2
for all other groups or refer to the user manual, topic section "Internal
Fonts" for a listing of all internal fonts.
In case of an invalid font number, the text is printed with YT100.
opt. d = 0 Normal write direction
= 1 Text rotated by 90 degrees
= 2 Text rotated by 180 degrees
= 3 Text rotated by 270 degrees
opt. t = N Text printed normally
= K Text printed in italics
opt. b = A Text printed inversely:
A dark background must first be applied to the print area (line or rectangle).
Inverse printed offset is not possible within Groups A and B.
opt. q = E Existing Bitimage is inverted.
Example
(Inverted Bitimage)
#!A1
#ER
#T5#J5#YL0/0/2.5/90#G
#T5#J5#YT100/0E///Example#G
#Q1/ The part of the text which overlaps the
line is printed in white, the rest in
black.
opt. j = M Middle:
The write command ( #T / #J ) refers to the centre of the text field. The field
is built up on both sides of the print position.
= R Flush right:
The write command (#T / #J) refers to the right edge of the text field. The
field is built up to the left.
opt. k = Snum Fixed distance in mm between all characters in TEXT. The character S has
to be succeeded without blank by the value.
opt. f = F Field designation for changing data
(see description of changing data)
opt. g = D Text field consists of one variable data field