Avery Dennison Monarch 9864 Description of Commands - Manual (Page 102)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
102
#YK Logo definition
Definition
This command is used to print a logo. The logo must be loaded in the
memory first.
The logo is a data block and is positioned in the label according to a
predefined reference point (
#T and #J command).
Command must stand between #ER and #Q!
Syntax #YKn/d Groups A, B
#YKn/dj Groups D, E, G
#YKn/djm Group H
n = int Logo number (0 to 255)
opt. d = 0 Logo in normal write direction
= 1 Logo rotated by 90 degrees
= 2 Logo rotated by 180 degrees
= 3 Logo rotated by 270 degrees
opt. j = M Middle:
The command #T refers to the centre of the field. The logo is hereby
created on both sides.
= R Flush right:
The command #T refers to the right edge of the field. The logo is built up to
the left.
opt. m = The same as m = A.
= A The logo is copied to the internal RAM disc (default setting).
= C The logo is copied to CompactFlash card.
(in directory "\logos", respectively)
Example
#YK10/0 Logo number 10 is printed, if
available.
Tx (wo. j)
Feed
Zero point
Logo
Jx
Zero point
Tx (j = R)