Adept s600 Cobra - Manual (Page 53)

Chapter 4: System Operation
Verify Robot Motions
Use the pendant (if purchased) to verify that the robot moves correctly. Refer to your Adept
pendant user's guide
for complete instructions on using the pendant.
If the optional pendant is not installed in the system, you can move the robot using the Robot
Jog Control in the Adept ACE software. For details, see the
Adept ACE User’s Guide .
4.7 Learning to Program the Adept Cobra s-Series Robot
To learn how to use and program the robot, see the Adept ACE User’s Guide , which provides
information on robot configuration, control and programming through the Adept ACE
software “point and click” user interface.
For V+/eV+ programming information, refer to the V+/eV+ user and reference guides in the
Adept Document Library (ADL) on the Adept website. For more details on the ADL, see Adept
Document Library on page 16.
Adept Cobra s600/s800 Robot, User’s Guide, Rev L1
Page 53 of 128