Adept s600 Cobra - Manual (Page 13)

Chapter 1: Introduction
CAUTION: This indicates a situation which, if not
avoided, could result in damage to the equipment.
NOTE: Notes provide supplementary information, emphasize a point or procedure,
or give a tip for easier operation.
1.3 Safety Precautions
DANGER: An Adept Cobra s600/s800 robot can cause
serious injury or death, or damage to itself and other
equipment, if the following safety precautions are not
observed.
l All personnel who install, operate, teach, program, or maintain the system must read
this guide, read the
Adept Robot Safety Guide , and complete a training course for their
responsibilities in regard to the robot.
l
All personnel who design the robot system must read this guide, read the Adept Robot
Safety Guide , and must comply with all local and national safety regulations for the
location in which the robot is installed.
l
The robot system must not be used for purposes other than described in Intended Use of
the Robots on page 14. Contact Adept if you are not sure of the suitability for your
application.
l The user is responsible for providing safety barriers around the robot to prevent anyone
from accidentally coming into contact with the robot when it is in motion.
l Power to the robot and its power supply must be locked out and tagged out before any
maintenance is performed.
1.4 What to Do in an Emergency Situation
Press any E-Stop button (a red push-button on a yellow background/field) and then follow the
internal procedures of your company or organization for an emergency situation. If a fire
occurs, use CO
2
to extinguish the fire.
1.5 Additional Safety Information
Adept provides other sources for more safety information:
Manufacturer’s Declaration of Conformity (MDOC)
This lists all standards with which each robot complies. For details, see Manufacturer’s
Declaration on page 15.
Adept Cobra s600/s800 Robot, User’s Guide, Rev L1
Page 13 of 128