Adept s600 Cobra - Manual (Page 17)

Adept Cobra s600/s800 Robot, User’s Guide, Rev L1
Page 17 of 128
Chapter 2: Robot Installation
2.1 Transport and Storage
This equipment must be shipped and stored in a temperature-controlled environment, within
the range –25 C to +55 C. The recommended humidity range is 5 to 90 percent, non-
condensing. It should be shipped and stored in the Adept-supplied packaging, which is
designed to prevent damage from normal shock and vibration. You should protect the package
from excessive shock and vibration.
Use a forklift, pallet jack, or similar device to transport the packaged equipment (see the
following figure).
The robots must always be stored and shipped in an upright position in a clean, dry area that
is free from condensation. Do not lay the crate on its side or any other position: this could
damage the robot.
The s600 robot weighs 41 kg (90 lb) and the s800 weighs 43 kg (95 lb) with no options
installed.
Eyebolt for lifting robot
after robot has been
unbolted from the
transportation pallet.
Place forklift or pallet-jack here.
Figure 2-1. Cobra s600 Robot on a Transportation Pallet