Echelon i.LON SmartServer 2.0 - Manual (Page 147)

i.LON SmartServer 2.0 Programming Tools User’s Guide 133
Note: For more information on using Web connections, including how to validate, delete, and add
attachments to them, see Chapter 4 of the i.LON SmartServer 2.0 User’s Guide.
Creating Custom FPM Configuration Web Pages
You can create configuration Web pages for your FPM applications using i.LON Vision 2.0. To do
this, you add i.LON Vision 2.0 read/write and application objects to the default custom Web page that
was created for your FPM when you uploaded it to the SmartServer flash disk. The default custom
Web page for your FPM is located in the root/web/config/FB folder on the SmartServer flash disk.
Once you publish the FPM configuration Web page, you can click the General button above the
navigation pane on the left side of the SmartServer Web interface, click the functional block
representing your FPM application, and use the configuration Web page to read and write values to the
data points in your FPM application. In addition, all instances of the same functional block in a static
device interface and any new FPM devices you create will automatically have this custom FPM
configuration page built for them.
To create a custom FPM configuration Web page follow these steps:
1. Verify that a default configuration Web page has been created for your FPM application. To do
this, use an FTP client to browse to the root/web/config/Fb/folder on the SmartServer flash disk
and confirm that an .htm file with the program ID and name of your FPM application is in the
folder.