Echelon i.LON SmartServer 2.0 User Manual
Page 109
i.LON SmartServer 2.0 Programming Tools User’s Guide
95
h. Click OK to return to the C/C++ Projects view.
6. Set the Debug 4.03 or Debug configuration as the active configuration so that it is built
automatically when you build your FPM. To do this, right-click the FPM project, point to Build
Configurations, point to Set Active, and then click Debug 4.03 or Debug.
7. Build your FPM project, as described in Compiling an FPM earlier in this chapter. A Debug 4.03
or Debug folder now appears in the C/C++ Projects View under the Includes folder.