Echelon i.LON SmartServer 2.0 - Manual (Page 107)

i.LON SmartServer 2.0 Programming Tools User’s Guide 93
• To reboot your SmartServer using the SmartServer console application, enter the reboot
command. For more information on using the SmartServer console application, see the i.LON
SmartServer 2.0 User’s Guide.
5. Create a debug configuration for your FPM project. You can skip to step 6 if you already have a
debug configuration for your FPM. You have already created a debug configuration if you
imported and upgraded an existing debug configuration of an FPM project to the Debug 4.03
format as described in Upgrading the i.LON SmartServer 2.0 Programming Tool in Chapter 2, or
if you selected the Debug 4.03 or Debug configurations when you created the FPM project as
described in the Creating New FPM Projects section earlier in this chapter.
To check whether there is a debug configuration created for your FPM, and then create a debug
configuration, if necessary, follow these steps:
a. Right-click the FPM project, point to Build Configurations, and click Manage.
b. The Manage Configurations dialog opens.