Echelon i.LON SmartServer 2.0 - Manual (Page 144)

130 Deploying Freely Programmable Modules on a SmartServer
e. Click Submit.
3. From the local SmartServer tree on the left frame, right-click a source data point and then click
Add Binding in the shortcut menu. The source data point will typically be an output data point on
the internal SmartServer device, an output data point on an external device connected to the
SmartServer, or an FPM output data point. Updates to the source data point in a Web connection
are propagated to one or more target data points.
4. The Configure – Web Binder Web page opens and the hostnames of the local SmartServer and
any remote SmartServers added to the LAN, which are collectively referred to as Webbinder
Destinations, appear in the application frame to the right. If a Webbinder Destination cannot be
reached, a single child node called “Target” appears with the IP address of the SmartServer below
the Webbinder Destinations icon.