Cub Cadet I-Beam Style - Manual (Page 89)

3-70
a. Fix: Proceed to the Interior Gear Case Assem-
bly
3.Is the spiral pin securing the indicator bracket
to the shift lever? See Figure 3-197.
• Fix: Install a new spiral pin.
4.Is the clutch control cable adjusted properly?
See Figure 3-198.
a.Fix: Perform the Clutch Cable Adjustment sec-
tions.
5 Is the V-belt worn or stretched? See Figure 3-199.
a. Fix: Perform the Belt Replacement section.
6.Is the V-belt routed correctly?
Fix: Remove the belt cover and verify that the
V-belt is routed correctly.
7.Does the engine pulley rotate the crankshaft of
the engine?
a.Fix: Remove the engine pulley halves and
replace.
8.Is the input pulley secured to the input shaft?
See Figure 3-200.
Tillers.fm Page 70 Tuesday, February 19, 2002 1:28 PM