Cub Cadet I-Beam Style - Manual (Page 271)

6-72
Control Valve
1. Loosen the hose clamp securing the return
hose to the control valve return elbow using a
5/16" socket or a flat-blade screw driver. See
Figure 6-121.
2. Remove, drain, cap and position the return
hose out of the work area.
3. Remove, drain, cap and position the high pres-
sure hydraulic hose out of the work area using
channel locks and a 1-1/16" wrench. See Fig-
ure 6-122.
4. Remove the steel hydraulic tube that connects
from the rear port of the hydraulic cylinder to
the 90 degree fitting on the control valve using
two 7/8" wrenches. See Figures 6-123 and 6-
124.
Log Splitter Control Valve Removal
Figure 6-120.
Figure 6-121.
Figure 6-122.
Figure 6-123.
Log Splitters 2.fm Page 72 Wednesday, February 20, 2002 1:35 PM