Cub Cadet I-Beam Style - Manual (Page 65)

3-46
4.Remove cotter pin from hooked end of control
rod at indicator bracket. See Figure 3-116.
5.Remove roll pin from indicator bracket. See
Figure 3-117.
6.Remove shift cover by removing two self-tap-
ping screws and flat washers. See Figure 3-
118.
7.Cut the cable tie holding the throttle control
cable at shifting shaft in top of chain case. See
Figure 3-119.
Tillers.fm Page 46 Tuesday, February 19, 2002 1:28 PM