Cub Cadet I-Beam Style - Manual (Page 272)

6-73
6
5. Remove the 90 degree return elbow from the
control valve using a 7/8" wrench and a large
adjustable wrench. See Figure 6-125.
6. Remove the control valve from the front port of
the hydraulic cylinder using a 7/8" wrench and
a large adjustable wrench. See Figure 6-126.
NOTE
Secure the front port with a 7/8" wrench to
make certain damage does not occur to the
front port.
7. Replace the control valve and install it in the
reverse order above. See Figure 6-127.
Informational Control Valve Disassembly
WARNING
DO NOT perform this section under warranty!
It voids all warranty. This section has been cre-
ated for the inquisitive mechanic that wants to
know more about the internal workings of the
control valve. See Figure 6-128.
Figure 6-124.
Figure 6-125.
Figure 6-126.
Figure 6-127.
Log Splitters 2.fm Page 73 Wednesday, February 20, 2002 1:35 PM